Oddball FL350 Aluminum Fuel Tank

The Oddball ORV aluminum fuel tank is an excellent upgrade / replacement to the stock steel fuel tank that often time can be rusted out. Holding nearly the same capacity and fitting in the stock location, this tank is a much safer alternative than running a spun aluminum tank on the roll cage bars above the engine (as is commonly seen). 

The fuel tank features a fuel sending probe port (sending unit not included in base config) pre-tapped mounting holes for the stock fuel pump, pre-tapped vent port and a pre-tapped fuel return line port. The base configuration is the tank only and does not include any hose fittings or other items. You will need to use the stock mounting hardware from the steel tank to mount the tank to the frame.

Availability: Made to Order, ~2 to ~4 Weeks for Production. Click Here for Details

Note 1: Tank does NOT include the fuel sending unit. It will have the opening for the sending unit pre-cut but capped off. If you elect to add a fuel sending unit, you will need the 11" version of this unit here.

Note 2: The following items are included with the fuel tank.

1. 2x Mini Ball Valves for fuel shut off.
2. Hose Clamps
3. 8ft of 1/4" ID Clear Fuel Line
4. Brass Hose Barb Tee
5. 2x 1/4" Hose Barbs
6. Billet Filler Nick Cap
7. 2x 90 Deg Hose Elbows
8. Fuel Tank Vent

Items not included:

1. Fuel Gauge
2. Fuel Sending Unit (gasket and blocking plate will be sent to seal the opening)
3. Fuel Pump