FL350 RZR Seat Conversion Pan (12, 14 & 16 Gauge Options)
Ordering, Production & Fitment Notes:
- Availability & Lead Time: Made to Order with an estimated production lead time of approximately 2 to 4 weeks. Click Here for Details.
- Seat Height & Taller Rider Clearance: The RZR seat will sit slightly higher in the roll cage frame than the original stock seat. Taller riders may experience tighter helmet/cage clearance. You can recline or tilt the seat back by adding spacers or washers under the front mounts; note that tilting may require relocating or adjusting the harness crossbar to clear the seat back.
- Vehicle Application: Purpose-built drop-in adapter pan engineered specifically for the 1985 Honda Odyssey FL350R chassis.
- Recommended Gauge Sizing:
- 12 Gauge: Heavy-duty strength recommended for riders greater than 250 lbs.
- 14 Gauge: Balanced strength and weight recommended for riders between 175 lbs and 249 lbs.
- 16 Gauge: Lightweight design recommended for riders up to 174 lbs.
FL350 RZR Seat Conversion Pan
One of the single most difficult components to locate for a vintage Honda Odyssey is an original FL350 seat in good condition without tears, cracks, or rust. Decades of outdoor storage and weather exposure have caused most factory seat pans and rear steel brackets to rust completely through. Sourcing an intact, usable OEM replacement is increasingly difficult and often prohibitively expensive.
Unless your goal is a 100% bone-stock museum restoration, swapping out the seating assembly with the Oddball ORV FL350 RZR Seat Pan is the ultimate modern cockpit upgrade. This direct drop-in conversion pan allows you to mount a modern Polaris RZR bucket seat directly into your Odyssey. You immediately gain substantial back and neck support, deep lateral hip bolstering to keep you centered in high-speed turns, and thick modern foam cushioning that absorbs harsh chop, making your machine significantly safer, more supportive, and comfortable on long rides.
Key Specifications & Features:
- Direct Drop-In Architecture: Tailored to bolt straight onto the FL350 floor pan structure without complex chassis fabrication.
- Three Gauge Options: Choose between 12-gauge, 14-gauge, or 16-gauge steel configurations to match rider weight and chassis stiffness goals.
- Polaris RZR Bucket Compatibility: Engineered to accept common factory and aftermarket Polaris RZR bucket seats for modern ergonomics.
- Superior Lateral Containment: Keeps the driver firmly planted behind the controls through off-camber sections, sand bowls, and whoops.
- Integrated Tilt Flexibility: Can be leveled or raked back using simple spacers to fine-tune driving position and helmet clearance.
- Precision CNC Fabrication: Laser-cut and formed for repeatable fitment, structural rigidity, and clean bolt-up installation.
Order Direct from Oddball ORV for Exact Fitment & Fast Shipping
| Origin | Aftermarket |
|---|---|
| Condition | New |
| ATV Make | Honda |
| ATV Model | FL350R, FL350R - Rotax |
| Height | 22 |
| Width | 22 |
| Depth | 5 |
