Honda Pilot FL400R Front & Rear Stainless Steel Braided Brake Line Kit
Fitment, Inclusions & Hydraulic Safety Notes:
- Complete Front & Rear Kit: Includes all flexible brake lines required to overhaul both the front steering/A-arm circuits and the rear swingarm caliper circuit.
- Zero Expansion Technology: Premium extruded PTFE smooth-bore inner core wrapped in high-tensile stainless steel braid, completely encased in a clear UV-resistant protective PVC sleeve to prevent grit intrusion and chassis scuffing.
- Mandatory System Bleed: Opening the hydraulic brake circuit introduces air into the master cylinders, junction tees, and calipers. A thorough brake fluid flush and complete bleed are required prior to operation.
- Vehicle Compatibility: Engineered specifically for direct bolt-on installation on the 1989–1990 Honda Pilot FL400R.
Honda Pilot FL400R Front & Rear Stainless Steel Braided Brake Line Kit
Eliminate lever sponginess and restore race-grade stopping power to your machine with the Complete Front & Rear Stainless Steel Braided Brake Line Kit for the 1989–1990 Honda Pilot FL400R. Over three decades of heat cycles, sand blasting, and repeated steering yoke movement leave factory rubber brake lines brittle, crazed, and soft. Under aggressive braking, deteriorating stock lines balloon outward, dissipating hydraulic pressure before it ever reaches the friction surfaces.
This comprehensive kit replaces all critical flexible hydraulic hoses across the entire vehicle in one complete package. Featuring an extruded PTFE core shielded by marine-grade stainless steel wire braid, these lines eliminate volumetric expansion entirely. Every ounce of pressure from the steering yoke levers transfers directly to the front wheel cylinders and rear disc caliper for instant bite, linear modulation, and confident high-speed stopping.
Key Specifications & Features:
- Complete Vehicle Coverage: Supplies all required flexible hydraulic lines for both front and rear brake systems on the FL400R.
- Zero Volumetric Expansion: High-tensile stainless steel braid prevents line swell under severe braking, delivering firm lever feel and consistent stopping force.
- Durable Clear Protective Jacket: Shields the stainless weave from trail dirt, sand, and mud pack while preventing the wire braid from rubbing chassis tubes.
- Factory-Matched Routing: Designed to follow OEM line paths along the steering column, front suspension arms, and rear trailing arm without binding at full suspension travel or steering lock.
- Chemical & Heat Resistant: Heavy-duty PTFE inner core works seamlessly with DOT 3, DOT 4, and high-temperature racing fluids.
- Corrosion-Resistant End Fittings: Plated, precision-crimped ends provide leak-free hydraulic sealing under harsh off-road conditions.
Order Direct from Oddball ORV for Exact Fitment & Fast Shipping
| Origin | Aftermarket |
|---|---|
| Condition | New |
| ATV Make | Honda |
| ATV Model | FL400R |
| Manufacturer | Oddball ORV |
| Material | 304SS |
| Height | 12 |
| Width | 12 |
| Depth | 2 |
| Core Required | No |
