Top End Wrist Pin Needle Bearing - Honda Pilot FL400R (1989–1990)
Fitment, Lubrication & Top-End Rebuild Guidelines:
- Vehicle Compatibility: Precision-engineered specifically for the connecting rod small-end bore of the 397cc liquid-cooled two-stroke single in the 1989–1990 Honda Pilot FL400R.
- Mandatory Replacement During Top-End Service: Never reuse an existing or high-hour wrist pin needle bearing when installing a new piston, rings, or freshly bored cylinder. Heat-fatigued bearing cages or worn rollers can shatter under high-RPM oscillation, sending hardened steel needles straight into the crankcase, transfer ports, and combustion chamber.
- Pre-Assembly Lubrication: Before sliding the wrist pin through the piston pin bosses and bearing, thoroughly coat the needle rollers and small-end rod bore with high-grade two-stroke premix oil or dedicated engine assembly lubricant. Never assemble a dry needle bearing.
- Small-End Bore Inspection: Inspect the inside surface of the connecting rod small-end eye for pitting, heat bluing, or out-of-round wear prior to installing the new bearing.
Top End Wrist Pin Needle Bearing (Honda Pilot FL400R 1989–1990)
Protect your top-end rebuild and ensure smooth, friction-free piston articulation with a new Top End Wrist Pin Needle Bearing for the 1989–1990 Honda Pilot FL400R. Housed inside the small end of the connecting rod, this compact caged roller bearing absorbs massive reciprocating shock loads and rapid thermal cycles every time the 400cc piston reverses direction at top and bottom dead center.
Over decades of aggressive dune and trail running, aged factory needle bearings develop roller flat-spotting, cage micro-cracks, and excessive radial play—causing audible piston knock, accelerated wrist pin galling, and catastrophic engine destruction if a roller escapes into the cylinder. Manufactured from high-carbon chromium bearing steel with a precision-formed retainer cage, this direct-replacement bearing restores tight radial tolerances, maximizes oil film retention, and gives your freshly rebuilt FL400R top end dependable, long-lasting performance.
Key Specifications & Features:
- Dedicated 1989–1990 FL400R Fitment: Built to exact OEM inner diameter, outer diameter, and width dimensions for the Honda Pilot 400 connecting rod small end.
- High-Load Needle Rollers: Precision-ground chromium steel rollers evenly distribute peak combustion shock loads across the wrist pin surface.
- High-RPM Retainer Cage: Engineered cage geometry keeps rollers properly spaced and aligned while allowing generous two-stroke oil mist lubrication.
- Essential Top-End Insurance: Eliminates wrist pin knock and prevents needle failure during piston, ring, or cylinder overhauls.
- Universal Piston Compatibility: Works seamlessly with both OEM cast pistons and aftermarket forged piston kits.
Package Includes:
- (1) Top End Wrist Pin Needle Bearing (Honda Pilot FL400R)
Order Direct from Oddball ORV for Exact Fitment & Fast Shipping
| Origin | Aftermarket |
|---|---|
| Condition | New |
| ATV Make | Honda |
| ATV Model | FL400R |
| Height | 4 |
| Width | 4 |
| Depth | 4 |









